3400, 10180 101 St NW, Edmonton, AB T5J 3S424/7 service 1 (800) 716-8955
  1. Home
  2. Guides
  3. Instrumentation, controls and automation
  4. PLC basics for owners and facility managers
Instrumentation, controls and automation

PLC basics for owners and facility managers

What a programmable logic controller does, what to keep on file, and the questions that protect you when a PLC runs your process, pumps or equipment.

7 min readFor facility managers2 illustrations

What a PLC is

A programmable logic controller (PLC) is an industrial computer built to run machinery and processes reliably for years. It sits in a control panel, reads signals from switches and instruments, makes decisions according to its program, and turns motors, valves and alarms on and off.

PLCs run lift stations, water treatment skids, conveyors, compressors, packaging lines, snow-melt systems and plenty of equipment you may not think of as "automated". Many owners inherit them with the building and only learn about them when something stops working.

FIG 01Alberta Electrical
Block diagram of four inputs feeding a PLC, which drives four outputs, with an HMI screen and a network connection below. WHAT A PLC IS CONNECTED TO START BUTTON LEVEL SWITCH PRESSURE (4-20) MOTOR RUNNING INPUTS PLC CPU RUNS THE PROGRAM MOTOR STARTER VFD SPEED VALVE ALARM LIGHT OUTPUTS HMI SCREEN NETWORK: SCADA, BAS, REMOTE ACCESS
A PLC reads inputs from switches and transmitters, runs its program, and drives outputs like motor starters, drives and valves, with an HMI screen for operators.

How it thinks

A PLC does the same thing over and over: read all inputs, run through the program, set all outputs, handle communications, repeat. This scan happens many times a second, which is why it reacts quickly and predictably.

FIG 02Alberta Electrical
Circular diagram of the PLC scan cycle next to a simple ladder logic rung with start and stop contacts driving a motor coil. THE SCAN: REPEATS MANY TIMES A SECOND 1 READ INPUTS 2 RUN LOGIC 3 WRITE OUTPUTS 4 COMMS, CHECKS EXAMPLE RUNG: STARTSTOPMOTOR IF START AND NOT STOP,RUN THE MOTOR
A PLC repeats a fixed cycle: read inputs, run the program, update outputs, then handle communications, with logic often written as ladder rungs.

Programs are commonly written in ladder logic, which looks like an electrical drawing, or in function blocks and structured text. You do not need to read the code, but you should know where it is kept and who can change it.

The parts you will hear about

  • CPU or processor: runs the program. Holds the configuration and, usually, a copy of the program in memory.
  • I/O modules: the cards that connect field wiring. Digital (on/off) and analog (such as 4-20 mA).
  • Power supply: feeds the rack. Often backed by a UPS so a power blip does not stop the process.
  • HMI: the touchscreen or computer where operators see status, change setpoints and acknowledge alarms.
  • Network: links the PLC to drives, other PLCs, SCADA, the BAS or remote access.
  • Programming software and licence: needed to view or change the program. Often specific to the manufacturer and version.

What every owner should have on file

The single most useful thing you can do as an owner is make sure nobody else holds your system hostage. Keep, in a safe place you control:

  1. A current backup of the PLC and HMI programs, with comments, dated and labelled with the version running in the field.
  2. Electrical drawings for the control panel, updated to as-built.
  3. An I/O list showing what each input and output does.
  4. Passwords for the PLC, HMI and any remote access, held by the owner, not just the integrator.
  5. Model numbers and firmware versions of the hardware.
  6. A functional description in plain language of what the system is supposed to do.
TipAsk for it at handover

Make program backups, drawings and passwords a written deliverable in any controls contract. It costs little at handover and can be very expensive to recover later.

Spares, support and lifecycle

PLC hardware has a long but finite life. Manufacturers eventually move product lines to mature and then discontinued status, after which spares get scarce and expensive. Know where your hardware sits in that lifecycle and keep critical spares, such as a CPU, power supply and common I/O cards, on the shelf if the process cannot tolerate a long outage.

If your system is already discontinued, read migrating obsolete PLCs before the next failure forces a rushed decision.

Questions to ask before buying a new system

Whether a PLC comes inside a vendor's equipment skid or is part of a custom control panel, a few questions up front save trouble later:

  • Is the hardware a current product line with good local availability of spares?
  • Will we receive the unlocked program, with comments, and the right to modify it?
  • What software and licences do we need to view or change it, and who pays for them?
  • Can the system share data with our SCADA or building automation system using open protocols?
  • How will remote access be provided and secured?
  • What training and documentation are included at handover?

Locked or proprietary programs are not always a deal-breaker, but you should know what you are agreeing to before the equipment arrives.

Safety and changes

Standard PLCs are not, on their own, safety devices. Emergency stops and safety functions are handled by hardwired circuits, safety relays or safety-rated controllers designed for that purpose. Any change to logic that affects equipment movement or protection should be reviewed, tested and documented.

SafetyDo not force it in production

Forcing inputs or outputs, or editing logic online, can start equipment unexpectedly. Changes should be planned, made by qualified people, and tested with the equipment in a safe state.

Our PLC systems and control panels services cover new systems, troubleshooting, documentation recovery and backups for existing equipment.

Common questions

What is the difference between a PLC and a BAS controller?

Both are programmable controllers. PLCs are built for machinery and processes with fast, deterministic control. BAS controllers are built for HVAC and building systems and use building protocols like BACnet. The line blurs, and many sites have both.

Our integrator went out of business. Can someone else support the PLC?

Usually, if you have the program backup and drawings. Without them, a technician can often upload the program from the PLC, but comments and documentation may be lost. Do this sooner rather than later.

Do we need a UPS on our PLC?

For many processes, yes. A short outage can stop a PLC or HMI and require manual restart, and a UPS rides through brief interruptions and allows a controlled shutdown on longer ones.

Can a PLC send us alarms on our phone?

Yes, through a SCADA system, a cellular gateway or a remote monitoring service. Security for that connection matters; see our guide on cybersecurity for building and plant controls.

About this guideGeneral information, not a site assessment

Codes and permit rules change and every building is different. For work on your system, talk to a licensed electrician and your local permit authority.

Keep reading

More on instrumentation, controls and automation

All 12 guides →
Instrumentation, controls and automation · 8 min

Migrating obsolete PLCs without a long shutdown

How to tell when your PLC hardware is becoming a risk, the main migration approaches, and how to plan a cutover that keeps the outage short.

Read the guide →
Instrumentation, controls and automation · 7 min

SCADA and remote monitoring for remote sites

How SCADA ties lift stations, reservoirs, pump houses and well sites together, the communication options for rural Alberta and BC, and what makes a remote system reliable.

Read the guide →
Instrumentation, controls and automation · 7 min

What a building automation system does

A plain-language look at building automation: what it controls, how it is put together, and how owners and operators use it to save energy and catch problems early.

Read the guide →

Need an electrician?

Call the 24/7 line or send a request and we'll set up a consultation and a free estimate.

Call 24/7Request service