3400, 10180 101 St NW, Edmonton, AB T5J 3S424/7 service 1 (800) 716-8955
  1. Home
  2. Guides
  3. Instrumentation, controls and automation

Guides

Instrumentation, controls and automation

12 illustrated guides on instrumentation, controls and automation.

Instrumentation, controls and automation · 7 min

4-20 mA loops explained for owners and operators

What a 4-20 mA signal is, why industry still relies on it, how to read one, and what usually goes wrong with analog instrument loops.

Read the guide →
Instrumentation, controls and automation · 7 min

How to set instrument calibration schedules

A practical approach to deciding how often each instrument gets calibrated, what a good calibration record contains, and how to adjust intervals using your own data.

Read the guide →
Instrumentation, controls and automation · 6 min

What a loop check is and why it matters

A loop check proves that each instrument and control signal is wired, configured and displayed correctly from the field device to the operator screen. Here is what it involves and when you need one.

Read the guide →
Instrumentation, controls and automation · 8 min

Hazardous locations basics for shops and plants

What makes an area a hazardous location, how Zones and Divisions work, the common ways electrical equipment is protected, and what owners are responsible for.

Read the guide →
Instrumentation, controls and automation · 7 min

Gas detection in shops, parkades and plants

How fixed gas detection works, which sensor types suit which gases, where sensors go, and how to keep a system you can trust.

Read the guide →
Instrumentation, controls and automation · 7 min

PLC basics for owners and facility managers

What a programmable logic controller does, what to keep on file, and the questions that protect you when a PLC runs your process, pumps or equipment.

Read the guide →
Instrumentation, controls and automation · 8 min

Migrating obsolete PLCs without a long shutdown

How to tell when your PLC hardware is becoming a risk, the main migration approaches, and how to plan a cutover that keeps the outage short.

Read the guide →
Instrumentation, controls and automation · 7 min

SCADA and remote monitoring for remote sites

How SCADA ties lift stations, reservoirs, pump houses and well sites together, the communication options for rural Alberta and BC, and what makes a remote system reliable.

Read the guide →
Instrumentation, controls and automation · 7 min

What a building automation system does

A plain-language look at building automation: what it controls, how it is put together, and how owners and operators use it to save energy and catch problems early.

Read the guide →
Instrumentation, controls and automation · 7 min

Building automation for small and mid-size buildings

Practical building automation options for offices, retail, clinics, churches, schools and light industrial buildings, and how to choose one you can live with for years.

Read the guide →
Instrumentation, controls and automation · 7 min

Sub-metering and energy dashboards that actually get used

How electrical sub-metering works, where meters pay off, what to show on an energy dashboard, and the rules to know before you bill tenants.

Read the guide →
Instrumentation, controls and automation · 7 min

Cybersecurity basics for building and plant controls

Building automation systems, PLCs and SCADA are now networked, which makes them targets. Here are the practical steps owners can take without becoming security experts.

Read the guide →

Rather have an electrician look at it?

Call the 24/7 line or send a request and we'll set up a consultation and a free estimate.

Call 24/7Request service