3400, 10180 101 St NW, Edmonton, AB T5J 3S424/7 service 1 (800) 716-8955
  1. Home
  2. Services
  3. Controls and automation

Service

Controls and automation

PLCs, control panels, SCADA and system migrations that keep your process running and your operators informed.

CommercialIndustrial

Industrial controls and automation across Alberta and British Columbia: PLC systems, custom control panels, SCADA and remote monitoring, and migrations off obsolete control platforms.

Automation that fits your operation

Pumps, conveyors, compressors, process skids and packaging lines all depend on controls that make thousands of small decisions every minute. When controls are well designed and documented, operators trust them and maintenance can fix them. When they are not, every fault becomes a long night.

Alberta Electrical's controls team works on industrial and municipal control systems across Alberta and British Columbia from our Edmonton head office. We combine licensed journeyperson electricians, instrument technicians and controls specialists, so the panel, the wiring, the instruments and the program are handled together.

Our controls services

Our controls work covers four areas:

  • PLC systems: programming, modifying and troubleshooting programmable logic controllers and the HMIs that go with them.
  • Control panels: designing, building, installing and modifying panels for machines, pumps and processes.
  • SCADA and remote monitoring: watching and controlling sites from a central location, with alarms sent to the people on call.
  • Controls migration: replacing obsolete PLCs, relay logic and old SCADA without losing what the old system did.
FIG 01Alberta Electrical
Stacked trapezoid showing level 0 field devices, level 1 PLCs and control panels highlighted in orange, level 2 SCADA and HMI, and level 3 remote access and reports, with an arrow showing information flowing between the process and people.Layers of a control systemremote access, reportsSCADA and HMIPLCs and control panelsinstruments, valves, motors, drivesLevel 3Level 2Level 1Level 0people andbusinessthe process
The layers of a typical industrial control system, from field devices at the bottom through PLCs and control panels, SCADA and HMI, to remote access and reporting at the top.

Controls connect to everything around them. They read field instruments, run motor controls and drives, and often form part of a larger plant retrofit. We can take a project from the instrument to the screen.

How a small system fits together

Even a modest site shows how the pieces work. A transmitter measures a level, a PLC decides what to do, a drive runs the pump at the right speed, a local screen shows the operator what is happening, and a secure link lets a central SCADA system watch it and call someone if it fails.

FIG 02Alberta Electrical
A wet well with a level transmitter wired to a control panel holding a PLC and a VFD that powers the pump; the PLC connects to a local HMI and, in orange, through a cell modem with VPN to a central SCADA system.Example: a pump stationwet wellLTpumpcontrol panelPLCVFD4-20 mA levelmotor powerlocal HMIcell modem + VPNcentral SCADAand alarm calloutPLC holds the logic; SCADA watches many stations from one place.
A small pump station showing how a level transmitter, PLC, drive, local HMI and a secure cellular link to central SCADA work together.

We use PLCs, HMIs and drives from major manufacturers and work with the platform you already have where it makes sense. We do not push one brand; we recommend what suits your site, spares and support needs.

Support after start-up

A control system needs care for as long as the equipment runs. Software is updated, sensors fail, operators ask for changes and equipment is added. We offer ongoing support so those changes are made carefully and recorded.

  • Scheduled program backups and change records
  • Troubleshooting visits and 24/7 breakdown response
  • Small changes and screen updates
  • Spare parts reviews for critical controllers
  • Obsolescence planning before parts run out

Support is logged in our online job management system, so you always know what was changed, by whom and why.

Safety, standards and records

Control panels and field wiring follow the Canadian Electrical Code (CSA C22.1) as adopted in the province, and need permits under Alberta's Safety Codes Act or, in BC, through Technical Safety BC or a municipality that administers its own. Panels must carry an approval mark or be field evaluated before they are energized.

Machine and process safety functions such as emergency stops and safety interlocks need careful design, and their requirements depend on your risk assessment. We follow your engineer's safety design and never bypass a safety function to make something run.

SafetyDo not force or bypass to keep running

Forcing PLC bits or jumpering out an interlock can hide a real fault and put people at risk. If a control system keeps tripping, call for troubleshooting. Our 24/7 line is 1 (800) 716-8955.

Every project ends with updated drawings, I/O lists, commented program backups and a record in our online job management system, all backed by our 100% satisfaction guarantee.

Questions we hear

Do you work with our existing PLC brand?

Usually, yes. We work with PLCs from major manufacturers. If your current platform is obsolete or hard to support, we will explain the options rather than forcing a change.

Are you a certified integrator for a particular brand?

We do not claim certification with any manufacturer. We choose and support platforms based on what suits your site.

Can you work on systems another company programmed?

Yes. We start by backing up and reviewing the existing program and drawings, then document anything that is missing before we change it.

Do you only do industrial work?

Most of our controls work is industrial and municipal. For commercial building controls, see our building automation services.

How this job runs

What to expect

  1. Understand the process

    We walk the site with operators and maintenance, and review existing drawings, programs and pain points.

  2. Define the scope

    We write or review the control narrative and I/O list, plan outages and permits, and explain what drives the cost.

  3. Build and test

    Panels and programs are built and tested before site work, then installed and wired in planned windows.

  4. Commission and hand over

    We loop check, function test with operations, train staff and hand over drawings and program backups.

Related

Controls and automation services

Controls and automation

PLC systems

PLC and HMI programming, modifications, troubleshooting and support for industrial and municipal systems across Alberta and BC, with commented code and current backups.

View service →
Controls and automation

Control panels

Design, build, installation and modification of industrial control panels for pumps, machines and processes in Alberta and British Columbia, with approval and full documentation.

View service →
Controls and automation

SCADA and remote monitoring

SCADA, telemetry and remote monitoring for pump stations, lift stations, reservoirs, well sites and plants across Alberta and BC, with secure communications and alarm callout.

View service →
Controls and automation

Controls migration

Planned migration from obsolete PLCs, relay panels, legacy HMIs and SCADA to supported platforms, with short cutovers and full documentation, for facilities across Alberta and BC.

View service →

Guides

Read before you book

All guides →

Ready to book controls and automation?

Call the 24/7 line or send a request and we'll set up a consultation and a free estimate.

Call 24/7Request service