Service
Building automation
Heating, cooling, lighting and energy data working together, from one screen you can actually use.
Building automation for commercial, institutional and multi-family buildings across Alberta and British Columbia: BAS installation, HVAC controls, lighting control systems and energy metering.
What building automation does
A building automation system (BAS), sometimes called a building management system, controls and monitors the equipment that keeps a building comfortable and running: air handlers, boilers, heat pumps, exhaust fans, lighting and more. It runs them on schedules, keeps temperatures where they should be and tells someone when something fails.
In Edmonton, where heating runs most of the year and a -30 C night can freeze a coil in minutes, good controls protect equipment as well as comfort. They also cut energy use by running equipment only when it is needed.
Alberta Electrical installs and services building automation across Alberta and British Columbia from our Edmonton head office. Our licensed journeyperson electricians and controls technicians handle the wiring, controllers, network and programming as one team.
Our building automation services
Our building automation work covers four areas:
- BAS installation: controllers, networks, wiring and front-end software for new buildings, additions and replacements.
- HVAC controls: sequences for air handlers, rooftop units, boilers, heat pumps and terminal units, plus troubleshooting.
- Lighting control systems: occupancy and daylight sensing, schedules and networked lighting controls.
- Energy metering: electrical, gas and water meters that show where energy goes and help prove savings.
Automation often pairs with other upgrades, such as LED retrofits, heat pump wiring and EV load management. We look at the whole building so each system supports the others.
Open systems, not lock-in
Buildings last far longer than any controls product line. We favour open, widely used communication protocols such as BACnet so that future contractors can service and expand your system. We use controllers and software from major manufacturers as examples of what fits, and we do not claim certification with any one brand.
When you already have a system, we work with it where we can and integrate new equipment rather than replacing what still works.
Fire alarm systems are life safety systems with their own code requirements. A BAS may monitor fire alarm status or receive a signal to shut down fans as the fire alarm design requires, but it never takes over the fire alarm's job.
Who we work with
Our building automation clients include property managers, facility managers, building owners, condo boards and general contractors. Projects range from one rooftop unit added to an existing system to complete controls for a new building.
- Office and retail buildings: comfort, schedules and energy savings across tenant spaces.
- Schools, churches and community buildings: simple controls that volunteers and caretakers can manage.
- Multi-family buildings: boilers, make-up air, parkade fans and common-area lighting.
- Industrial buildings: office HVAC, shop heating and exhaust tied to the same front end.
Whatever the building, the goal is the same: a system your people understand and trust.
Permits, codes and support
Wiring for building automation follows the Canadian Electrical Code (CSA C22.1) as adopted in Alberta or BC. Permits in Alberta are issued under the Safety Codes Act, with the City of Edmonton issuing its own electrical permits; in BC, through Technical Safety BC or a municipality that administers its own. Energy code requirements for controls in new buildings and major renovations depend on the building and the code edition in force, so we confirm them with your designer and the permit authority.
Our online job management system keeps graphics, point lists, sequences and service reports in one place. For urgent problems, like heat loss on a cold night, call our 24/7 line at 1 (800) 716-8955. All work is backed by our 100% satisfaction guarantee.
Questions we hear
Is building automation only for large buildings?
No. Small offices, schools, churches, shops and multi-family buildings can all benefit, especially where several rooftop units or a boiler plant run on simple timers.
Can you work on our existing BAS?
Often, yes. We start by finding out what platform and protocols you have and whether it can be expanded, then recommend the most practical path.
Will we be locked into one contractor?
We design around open protocols and hand over passwords, programs and documentation so you are free to choose who services the system.
Do you handle the mechanical side?
We handle controls and electrical. We coordinate with your mechanical contractor for work on the equipment itself, such as valves and dampers.
How this job runs
What to expect
Walk the building
We review mechanical and electrical drawings, existing controls and the problems your occupants and operators see.
Plan the system
We set out points, sequences, network design, permits and phasing, and explain what drives the cost.
Install and program
Controllers, sensors and wiring go in with minimal disruption, followed by programming and graphics.
Commission and train
We test every point and sequence, tune the system, train your operators and hand over documents.
Related
Building automation services
BAS installation
Building automation system installation for new buildings, additions and control replacements across Alberta and BC: controllers, networks, sensors, wiring, graphics and commissioning.
View service →Building automationHVAC controls
HVAC controls for air handlers, rooftop units, boilers, heat pumps and terminal units in commercial and multi-family buildings across Alberta and BC: new sequences, retrofits, tuning and troubleshooting.
View service →Building automationLighting control systems
Occupancy sensing, daylight harvesting, scheduling and networked lighting controls for offices, schools, warehouses, retail and multi-family buildings across Alberta and British Columbia.
View service →Building automationEnergy metering
Electrical, gas and water submetering for commercial, industrial and multi-family buildings across Alberta and BC, connected to your BAS or an energy dashboard.
View service →Guides
Read before you book
4-20 mA loops explained for owners and operators
What a 4-20 mA signal is, why industry still relies on it, how to read one, and what usually goes wrong with analog instrument loops.
Read the guide →Instrumentation, controls and automation · 7 minHow to set instrument calibration schedules
A practical approach to deciding how often each instrument gets calibrated, what a good calibration record contains, and how to adjust intervals using your own data.
Read the guide →Instrumentation, controls and automation · 6 minWhat a loop check is and why it matters
A loop check proves that each instrument and control signal is wired, configured and displayed correctly from the field device to the operator screen. Here is what it involves and when you need one.
Read the guide →Ready to book building automation?
Call the 24/7 line or send a request and we'll set up a consultation and a free estimate.