- Home
- Services
- Controls and automation
- SCADA and remote monitoring
Controls and automation
SCADA and remote monitoring
See every site from one screen, and get the call before a small problem becomes a big one.
SCADA, telemetry and remote monitoring for pump stations, lift stations, reservoirs, well sites and plants across Alberta and BC, with secure communications and alarm callout.
One view of many sites
Water systems, gas gathering, agricultural operations and multi-building campuses often have equipment spread across many kilometres. Driving to each site to check on it is slow and expensive, especially in an Alberta winter. SCADA (supervisory control and data acquisition) brings those sites onto one screen.
A PLC or remote terminal unit at each site handles local control. SCADA collects data from all of them, shows operators what is happening, keeps a history and sends alarms to whoever is on call. Operators can also start, stop or adjust equipment remotely where the design allows it.
Communications that work in rural Alberta and BC
The link back to SCADA is often the weakest part of a remote system. We choose the communication method to fit each site:
| Link | Where it fits |
|---|---|
| Cellular | Sites with dependable coverage; quick to deploy |
| Licensed or unlicensed radio | Rural and hilly areas; no monthly carrier dependence |
| Fibre or Ethernet | Sites on a campus or near your own network |
| Satellite | Very remote sites with no other option |
Coverage maps are a starting point, not proof. We test signal strength at the actual panel location, and we design the system to keep running locally and store data if the link drops, then catch up when it returns.
Alarms that reach the right person
A monitoring system is only as good as its alarms. Too few and problems go unnoticed. Too many and people learn to ignore them. We work with you to decide which alarms matter, what priority each has and who should hear about them.
Callout can go to phones by voice call or text, with escalation if nobody acknowledges. Every alarm and acknowledgement is logged, which helps with reporting and with reviewing what happened after an event.
Trends, reports and history
SCADA is not only about alarms. A historian stores readings over months and years, so you can see how a pump's run time is creeping up, how flows change with the season or when a level started acting strangely.
- Daily and monthly flow, run-time and level reports
- Trends for troubleshooting and planning
- Records for regulatory reporting where required
- Data for maintenance planning and energy use
We set up reports that answer the questions your team actually asks, and keep the system lean enough that it stays fast and easy to use.
Security comes built in
A system that can start pumps from a laptop must be protected. We design remote access around firewalls, VPNs, separate control networks and individual user accounts, and we work with your IT team and policies rather than around them. Default passwords are changed and unused services are turned off.
Remote desktop tools or devices exposed directly to the internet are a common route for attacks on control systems. If your site has one, talk to us and your IT provider about replacing it with a secure design.
We use SCADA and HMI software from established vendors, and we can work with the platform you already have. Our instrument technicians and electricians handle the field instrumentation and control panels at each site, so one team owns the whole chain. For building systems, see our energy metering and building automation work.
Questions we hear
Can you add new sites to our existing SCADA?
Usually, yes. We match your existing screens, tags and alarm standards so new sites look and behave like the old ones.
What happens if the communication link goes down?
Each site keeps running on its local PLC or RTU. A communication failure alarm is raised, and well-designed systems buffer data and fill the gaps when the link returns.
Can operators control equipment remotely?
Where the design allows it, yes. Some functions are deliberately kept local for safety, and those decisions belong in the control narrative.
Do you provide monitoring as a service?
We design, install and support your system, and your own staff or a monitoring company receives the alarms. Our 24/7 line at 1 (800) 716-8955 is there when something needs a technician.
How this job runs
What to expect
Inventory the sites
We list each site's equipment, signals, power and communication options, and test coverage where needed.
Design the system
We set the architecture, alarm philosophy, screens and security approach with your operations and IT teams.
Build and connect
Panels, radios and modems are installed and wired, and screens and alarms are configured.
Commission and train
Each site is tested end to end, alarms and callout are proven, and operators are trained.
Related
More in Controls and automation
Controls and automation
Industrial controls and automation across Alberta and British Columbia: PLC systems, custom control panels, SCADA and remote monitoring, and migrations off obsolete control platforms.
View service →Controls and automationPLC systems
PLC and HMI programming, modifications, troubleshooting and support for industrial and municipal systems across Alberta and BC, with commented code and current backups.
View service →Controls and automationControl panels
Design, build, installation and modification of industrial control panels for pumps, machines and processes in Alberta and British Columbia, with approval and full documentation.
View service →Controls and automationControls migration
Planned migration from obsolete PLCs, relay panels, legacy HMIs and SCADA to supported platforms, with short cutovers and full documentation, for facilities across Alberta and BC.
View service →Guides
Read before you book
SCADA and remote monitoring for remote sites
How SCADA ties lift stations, reservoirs, pump houses and well sites together, the communication options for rural Alberta and BC, and what makes a remote system reliable.
Read the guide →Instrumentation, controls and automation · 7 minCybersecurity basics for building and plant controls
Building automation systems, PLCs and SCADA are now networked, which makes them targets. Here are the practical steps owners can take without becoming security experts.
Read the guide →Instrumentation, controls and automation · 7 min4-20 mA loops explained for owners and operators
What a 4-20 mA signal is, why industry still relies on it, how to read one, and what usually goes wrong with analog instrument loops.
Read the guide →Ready to book scada and remote monitoring?
Call the 24/7 line or send a request and we'll set up a consultation and a free estimate.